Downloading Still Images - Canon Vixia HF S11 - Camcorder - 1080p Instruction Manual

Downloading Still Images

Below explains the procedure for connecting a camcorder to a computer using the
USB cable. For connecting a card reader/writer, see Using a Card Reader/Writer
( 34).
You may not be able to download images with ImageBrowser or OS
standard software (depending on the computer you are using and the
installed OS) if the built-in hard disk/memory or the memory card contains
more than approximately 1000 images. In such case, copy the images in the
built-in hard disk/memory to a memory card and then use a card reader/
writer to download the images to the computer.
If the built-in hard disk/memory or the memory card contains a large number
of images, the correct connection to the computer may not be possible. The
maximum number of images depends on the camcorder used, so please
refer to the relevant chapter in your camcorder's Instruction Manual.
In such case, copy the images from the built-in hard disk/memory to a
memory card and then use a card reader/writer to transfer the images to the
computer.
Observe the following precautions when the camcorder's access indicator is
flashing. Failure to do so may cause data to become corrupted.
- Do not remove the memory card or detach the USB cable.
- Do not turn off the camcorder or the computer.
- Do not change the position of the mode dial.
The still images you recorded and/or downloaded to the hard disk are
important original data files. Create a copy of the file first before working on it
on your computer.
Downloading Still Images 25