Table of Contents Getting started Safety notes ...4 Features ...6 Package contents ...8 Names of the parts ...9 Using the player (Basic Operations) Turning the power on/off...11 Selecting folder ...12 Voice recording (VR selection) ...13 Playing back file ...14 Using the player (Additional Operations) Setting the A-B repeat ...15 Deleting file ...16 Deleting all files in the player ...19...
Safety notes Read this manual completely before using this product. Keep away from the reach of Do not short, disassemble, heat, infants and children. Batteries apply pressure or throw into fire. are dangerous to them. If anyone It can cause electrolyte leakage, swallows the battery, consult with overheat, breakdown or fire.
Features Digital music playback Plays back the MP3 and WMA type digital music.(For WMA file playback, bit rate of 64Kbps or more is available.) FM radio reception and recording Available to listen to FM radio and record the FM broadcasting. Digital interface (USB) Saves the recorded files in PC and plays back in media player or sends email (including attachment with motion picture).
Package contents Voice Recorder Earphone USB connection cable Installation CD Neck strap Phone connection cord/adaptor If these accessories are damaged or broken, you can get them from the Service Center. Appearance of the components is subject to change for the purpose of enhancing performance.
LCD display A-B repeat on/off Remaining battery amount Displaying EQ mode Locking status Music number and playback time Check the remaining battery amount. Inserting battery Push the cover to Insert a battery (AAA type) the arrow direction with the correct polarities to open the cover.
Selecting folder You can select a folder to playback in the VR or FM Radio mode. Press the Folder selection button (A-B RPT/FOLDER) button in the Stop mode. To control the volume level You can control the volume level from 0 to 25 in the Stop or Playback mode. Press the “+”...
Playing back file Press the Play/Stop button to turn on the power and select the mode – MP3 or VR. In the VR mode, select the folder containing the file to playback by pressing the folder selection button (A-B RPT/FOLDER). Whenever you press the button, the folder will be changed by the order of A, B, C and D.
Deleting file To delete one music or voice file Press the Play/Stop button to turn on the power and select the mode – MP3 or VR. In the VR mode, select the folder containing the file to playback by pressing the folder selection button (A-B RPT/FOLDER).
To delete entire music or voice files Select the MP3 or VR file and press the Erase button. Select the “ALL MP3” for the MP3 mode, or select “FOLDER ALL” for the VR mode. Select the “ALL MP3" or the “FOLDER ALL" using the REW/FF button and press the Menu button.
Setting the Intro scan Press the Play/Stop button longer than 2 seconds while playing back MP3 or VR files. Starting from the current file, the intro section of all files will be played back for 7 seconds, and the mode will be released and the initial state will be resumed. Setting menu (when the MP3 is selected) Press the Play/Stop button to turn on the power and select the MP3 mode.
Setting My Option (when the MP3 is selected) Setting the EQ mode After pressing the Menu button in the Playback or Stop mode, select the EQ Mode using the REW/FF button. The player will enter the Sound setting mode. Select the tone you want using the REW/FF button. Normal mode Classic mode Live mode...
Setting the LCD light After pressing the Menu button in the Playback or Stop mode, select the LCD light using the REW/FF button. Select the time you want using the REW/FF button. You can set the flashing time of the LCD light by 5 steps (2 – 5 seconds) after button manipulation.
Setting the Resume function If you stop playback by pressing the Play/Stop button during playback and start playback again, the playback will be resumed from the last played position. After pressing the Menu button in the Playback or Stop mode, select the RESUME using the REW/FF button.
Checking the memory You can check the available memory in the Playback or Stop mode. After pressing the Menu button in the Playback or Stop mode, check the available free memory using the REW/FF button. Press the Menu button again to see the remaining memory compared with the total memory.
Setting My Option (when the recording folder is selected) Setting the REC mode You can select the recording quality – HQ, SP or LP. You can also set the recording time depending on the recording quality. After pressing the Menu button in the Playback or Stop mode, select the REC MODE using the REW/FF button.
To set and save the station automatically Only the identifiable frequency will beset in the area that receives weak frequency. Press the Menu button. The player will enter the Radio mode. Press the Menu button again to select the “AUTO SAVE MODE" using the REW/FF button and press the Menu button.
Recording while listening to FM radio Press the REC/Stop button. The red lamp will flash and the saved folder and number will be displayed. Then, the recording will be started. If you press the Folder button before recording, the recording folder will be selected and saved in the file next to the recorded file.
Press the REC/Stop button in the MP3 player while playing back in the external device. The input details will be heard from the MP3 player earphone and recording will be started. Press the REC/Stop button again to stop recording. To adjust recording sound level, use the audio’s volume control function.
Connecting to your PC To connect the player to your PC To install the X-ONE Manager You can upload the file saved in the player to the PC, or download the file saved in the PC to the player. System requirements Computer: Pentium or faster CPU on the IBM compatible PC with USB port support.
To install the driver To install the driver on WINDOW 98/ME/2000 The driver will be automatically installed when you connect the player to the PC after installing the X-ONE Manager. If the PC cannot recognize the player, the “New Hardware Installation Wizard” message will appear.
Page 22
To install the driver on WINDOW XP If you install the X-ONE Manager and connect the product to your PC, the "New Hardware Installation Wizard" window is displayed. Press the [Next] button in each window that appears sequentially. Click the 'Browse’ and specify the path as follows. C:\Program Flles\X-ONE\X-ONE Manager\Driver Then, click ‘Next’.
Using the X-ONE window and icon Double-click the X-ONE shortcut icon on the desktop window while the USB is connected to run the X-ONE program. Main window Play list sync icon ID3 tag edit icon Mail program icon Player program icon Folder sync icon Explorer Information related with...
Uploading file 4. The selected files will be uploaded to PC. To rename the file, click the right mouse button and input new name. 2. Select the player file 1. Select the player folder. If you execute the program when the USB cable is not connected, the error message as shown at right side will appear.
Searching for the PC Help 1. Click Help button twice to display information on the PC application. 2. Click Help to display information on the PC application. Check points before enquiry Isn't the battery empty? The LCD Are the battery polarities correct? display is off.
Product Specifications Model Name EVR-M750 (128M)/EVR-M760 (256M) MP3 and WMA File Format (For WMA file playback, bit rate of 64Kbps or more is available.) Recording Time EVR-M750 Up to 35 hours EVR-M760 Up to 71 hours Dimensions 86(H) 31(W) Weight 31.7g (excluding the battery)
Need help?
Do you have a question about the EVR-M760 and is the answer not in the manual?
Questions and answers