Table of Contents
Advertisement
When prompted, use the arrow keys to select Yes from the Consistency
3.
Check? dialog box, and then press <Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
A progress bar appears on screen.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
4.
While checking the disk consistency, press <Esc> to display the following
options.
•
Stop
•
Continue - Continues the consistency check.
•
Abort
5.
When checking is complete, press any key to continue.
5-20
LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010
BIOS Version
Easy Configuration - ARRAY SELECTION MENU
LD
RAID
0
Yes
No
Virtual Drives
Virtual Drive 0
Select VD(s)
SPACE-(De)Select, F10-Initialize
LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010
BIOS Version
Easy Configuration - ARRAY SELECTION MENU
LD
RAID
0
VD 0 Consistency Check. Press Esc to Abort.
Virtual Drives
Virtual Drive 0
The Data On The Drives Is Inconsistency. Repair Done!
SPACE-(De)Select, F10-Initialize
- Stops the consistency check. The utility stores the
percentage of disk checked, and when you restart checking,
it continues from the last percentage completed rather than
from zero percent.
- Aborts the consistency check. When you restart checking, it
continues from zero percent.
A.10.09231523R
Virtual Drive(s) Configured
Size
#Stripes
10
154494MB
2
Consistency Check?
A.10.09231523R
Virtual Drive(s) Configured
Size
#Stripes
10
154494MB
2
CC Under Process
85% Completed
StripSz
Status
64KB
ONLINE
StripSz
Status
64KB
ONLINE
Chapter 5: RAID configuration
Advertisement
Table of Contents
