Rear Bagging - Craftsman 917376770 Operator's Manual

"COMBI-CUT" MOWERS
Your lawn mower was shipped ready to be
used as a mulcher. To convert to bagging
or discharging:
REAR BAGGING
• Open rear door and remove mulcher
plate. Store mulcher plate in a safe
place.
• You can now install grass catcher.
• To convert to mulching or discharging
operation, install mulcher plug into rear
discharge opening of mower, making
sure all tabs are seated properly.
Open mulcher door
Discharge
Slots "\
Mulcher
plate tabs
SIDE DISCHARGING
• Mulcher plate must be installed into rear
discharge opening of mower (see above
instructions).
• Open mulcher door and install dis-
charge deflector under door as shown.
• Mower is now ready for discharging
operation.
• To convert to mulching or bagging
operation, discharge deflector must be
removed and mulcher door must be
closed.
"MULTI-CUT" MOWERS
Your lawn mower was shipped ready to be
used as a mulcher. Some models have a
seperate mulcher plug, other models have
the mulcher plug built into the rear door.
To convert to bagging or discharging:
REAR BAGGING
• If equipped with a seperate mulcher
plug, lift rear door and remove muicher
plug. Store mulcher plug in a safe
place.
• Lift rear door and install grass catcher.
• To convert to mulching or discharging
operation, remove grass catcher, install
mulcher plug (if equipped), and close
rear door.
• Muicher door j_
Mulcher plug
13