Craftsman 917376770 Operator's Manual page 12

MULCHER PLUG TYPE "A"
Toconvert tomulching operation, mulcher
plug must b einstalled intodischarge
opening o fmower.
• Raise discharge guard andwork
mulcher plug intodischarge opening o f
mower.
• Position l ock lever o verhinge bracket
as
shown and raise lever to lock mulcher
plug in place.
• Allow discharge guard to rest against
lock lever.
• To return to discharging or bagging
operation, simply lower lock lever and
remove mulcher plug from mower.
_CAUTION: Do not run your lawn
mower without discharge guard, approved
grass catcher or mulcher plate or plug in
place.
Raise
discharge
e bracket
Mu]cher
lever
"down"
position
I Raise lever
to lock
12
Lower[ever
I to unlock
MULCHER PLUG TYPE "B"
TO convert to mulching operation, mulcher
plug must be installed into discharge
opening of mower.
• Open discharge guard.
• Insert tab of mulch plug into housing
opening.
• Align hooks of mulch plug over hinge
rod of discharge guard. Push mulch
plug down until mulch plug is seated in
housing opening.
_I, CAUTION: Do not run your lawn
mower without discharge guard, approved
grass catcher or mulcher plug in place.
Housing
opening
Mulch
Hinge rod