Table of Contents
Advertisement
Respond to an Incoming Call in Power-Save Mode
An incoming call alert automatically wakes up the phone from
power-save.
Respond to a Non-Call Alert in Power-Save Mode
While in power-save mode all alerts other than incoming calls require
you to first turn ON your phone before you perform the action required
to clear the alert.
First press Push Button A (ON/OFF BUTTON) to wake up your
phone.
Press any button to acknowledge the alert (vibrate/LED
flash/audible.)
Perform required action to clear status bar icon alert.
Auto-Sleep Mode
You can configure the auto-sleep mode feature in the web
interface to set the time your TicTalk phone wakes up and
goes to sleep, or powers down, each day. In the auto-sleep
mode, your TicTalk phone does not receive alerts until it wakes
up automatically at the set time, or until the device user turns it
on again. The auto-sleep mode enables the TicTalk phone to
operate with minimum battery usage.
C o p y r i g h t 2 0 0 5 , E n f o r a L . P .
2 5
Advertisement
Table of Contents
