Advertisement
NOTE: Make certain the drive cable is routed around
the outside and above the lower handle so it does not
interfere with attaching the grass bag.
The rope guide, which is connected to the support
rod, is located on the right side of lower handle.
See Figure 5.
With the spark plug wire disconnected and
grounded, hold the blade control handle against the
upper handle, and pull the starter rope out of the
engine. Release the blade control handle. Slip the
starter rope into the rope guide.
Rope
Ro
Guide
Figure 5
pport
SECTION 4: KNOW YOUR LAWNMOWER
Read this operator's manual and safety rules before
operating your lawn mower. Compare the illustrations
in Figure 6 with your lawn mower to familiarize yourself
with the location of various controls and adjustments.
Save this manual for future reference.
WARNING:
The
operation
of any
lawn
mower can result in foreign objects being
thrown into the eyes, which can damage
your eyes severely.
Always wear safety
glasses
while operating
the mower,
or
while
performing
any
adjustments
or
repairs on it.
Recoil Starter
The recoil starter is attached to the right lower handle.
Stand behind the unit and pull the recoil starter to start
the unit. See Figure 6.
Blade ControlHandle
The blade control handle is located on the upper handle
of the mower. The blade control handle must be
depressed in order to operate the unit. Release blade
control handle to stop engine and blade. See Figure 6.
Shift Lever
The shift lever is located on the drive clutch control
housing on the upper handle. This lever is used to
select the forward speed of the mower. When changing
speed selection, release the drive clutch control. See
Figure 6.
NOTE: Move the shift lever only when the engine is
running. Changing the shift lever setting with the
engine off can cause damage to the mower.
GrassBag
The grass bag is equipped with a bag-fill indicator to
add convenience to your work. While the mower is
running, air will flow through the bag and into the "sail."
If the grass catcher is empty, air flows through easily
pushing the sail up. If the grass catcher is full, air does
not flow through it allowing the sail to fall. So the
position of the sail acts as a bag-fill indicator signifying
when to empty the grass bag. See Figure 6.
Blade Control
Handle
WARNING: This blade control mechanism
is a safety device. Never attempt to bypass
its operations.
Rear CuttingHeightAdjustmentLever
The rear cutting height adjustment lever is located
above the left rear wheel. To adjust the cutting height,
refer to the Adjustment Section in this manual.
See Figure 6.
Drive ClutchControl
The drive clutch control is located on the upper handle.
Squeeze the drive control to engage the drive system.
Release the clutch control to disengage the drive
system. Release the clutch control to slow down when
approaching an obstacle, making a turn, or stopping.
See Figure 6.
Front Wheel CasterLocks
The caster locks are located on top of each caster
wheels. Refer to the Adjustment Section.
Lever
/Grass Bag
Rear Cutting Height
djustment Lever
Front Wheel
Caster Locks
Height Adjuster
Figure 6
Hide quick links:
Advertisement
