Transfer Settings; Single Images - Canon PowerShot SX100 IS User Manual

Print Settings/Transfer Settings 1159
i Setting the DPOF Transfer
Settings
[]
You can use the camera to specify settings for images before
downloading to a computer. Refer to the Software Starter Guide for
instructions on how to transfer images to your computer.
The settings used on the camera comply with the DPOF standards.
The _I icon may display for a memory card with transfer I
settings set by a different DPOF-compliant camera. These
I
settings will be overwritten by those set by your camera.
Single Images
Select [Transfer Order],
1. Press the [] button.
2. Press the _ button.
3. In the [] menu, use the ÷ or 41,
button to select [m Transfer Order].
4. Press the _ button.
Select [Order],
1. Use the 4, or ,_ button to select
[Order].
2. Press the @ button.
Selecting [Reset] cancels all transfer
order settings.
Select the images.
Transfer Selection
1. Use the ÷ or .I_ button to select
images to transfer.
2. Press the _ button.
• Pressing the FUNC./SET button
again desetects the setting.
• You can also select images in the
index playback mode.
3. Press the _ button several times.