Setting The Image Stabilizer Function - Canon PowerShot SX10 IS User Manual

821
_$etting the l_age Stabilizer Function
'.. -,- _,,,, _., ',,*° }} p. 284
The lens-shift type image stabilizer function allows you to minimize the
camera shake effect (blurred images) when you shoot distant subjects
that have been magnified or when you shoot in dark conditions without
a flash.
Options Display on the
LCD monitor Summary
Off
Continuous
Shoot Only
Panning
You can check the effect of the IS mode on
image blur on the LCD monitor (or the
viewfinder) since the IS mode runs
continuatly. This makes it easier to compose
images and focus on subjects.
Shoot Only IS mode is only activated when
the shutter button is pressed. When set to
[Continuous], some blurring may occur
depending on the subjects, in Shoot Only
mode, subjects can be taken without concern
for any unnatural movement that may appear
on the LCD monitor (or the viewfinder).
This option only stabilizes the effect of up
and down camera motions on the image.
This option is recommended for shooting
objects moving horizontally.
!. Press the MENU button.
2o In the _ menu, use the ÷ or @
button to select [IS Mode].