Advertisement
Available languages
Available languages
After cleaning:
Cl
Reinsert the mains plug or
switch on the fuse. Switch on
the appliance
with the on/off
button.
]]Have
your supplier inform you
about special cleaning and care
information
for appliance
surfaces.
Wipe appliance
surfaces with
a damp cloth.
Then immediately
wipe dry.
Odors
If the appliance
is emitting
unpleasant
odors:
Switch
off the appliance
with
the on/off
button!
Cl
Take all food out of the
appliance.
Clean the interior.
See section
on "Cleaning the
appliance".
Change the odor filter.
See section on "Changing
the
odor filter".
Thoroughly
clean all packing
containers
used in the
appliance.
Cl
Pack strong smelling food in
airtight containers
to prevent the
build up of odors.
Switch on the appliance
again
with the on/off
button.
Stack food in the appliance.
After 24 hours check whether
the odors have been eliminated.
Warning
messages
via the display
If several warning messages
are
displayed
simultaneously,
deal with
each message
individually.
While a warning
message
is
displayed,
buttons
cannot be
pressed.
Door alarm
Cause
An appliance
door has not been
closed properly or has been
open too tong.
Remedial
action
Cl
Ctosethe
door.
The display goes out.
Sensor fault
Cause
A technical
defect is possible.
Remedial
action
Cl
Conduct
an appliance
self test.
Low voltage
The display light has gone out.
Cause
The mains voltage has dropped
below the permitted
limit value.
Remedial
action
Buttons
cannot be pressed. When
the mains voltage reaches the
stipulated
value again, the warning
message
goes out. If the warning
message
is prolonged,
inform your
power supply company.
15
Advertisement
Chapters
