Table of Contents
Advertisement
5.1.3
Red Hat
Follow these instructions when installing the Marvell
driver for the Red Hat
Building the driver
Install first the Kernel Development tools before building the driver from the TAR
file.
To build the driver:
1.
Copy the Lan Driver from the SCD to local disk.
cp install_vxx.xx.x.x.tar.bz2 /
2.
Decompress the file.
tar xfvj install_vxx.xx.x.x.tar.bz2
3.
Change to the driver source directory.
cd /DriverInstall/
4.
In the DriverInstall directory, install the LAN driver.
sh install.sh
In the next step, enter 1 to continue.
5.
Installation script for sk98lin driver.
Version xx.xx.x.x (Oct-19-2007)
(C)Copyright 2003-2007 Marvell(R).
====================================================
Add to your trouble-report the logfile install.log
which is located in the DriverInstall directory.
====================================================
1) installation
2) generate patch
3) exit
Choose your favorite installation method:
Read the message on the screen and enter Y to continue.
6.
Please read this carfully!
This script will automatically compile and load the sk98lin
driver on your host system. Before performing both compilation
and loading, it is necessary to shutdown any device using the
sk98lin kernel module and to unload the old sk98lin kernel
module. This script will do this automatically per default.
Please plug a card into your machine. Without a card we aren't
able to check the full driver functionality.
Do you want proceed? (y/N)
5-4
Linux
®
Linux OS:
®
88E8056 LAN controller base
®
Chapter 6: Driver installation
Advertisement
Table of Contents
