System Panel Connector - Asus P5GC-MR User Manual

8. System panel connector (20-1 pin FPANEL1)
This connector supports several chassis-mounted functions.
System power LED (Green 2-pin PLED)
•
This 2-pin connector is for the system power LED. Connect the chassis
power LED cable to this connector. The system power LED lights up
when you turn on the system power, and blinks when the system is in
sleep mode.
Message LED (Brown 2-pin MLED)
•
This connector is for the message LED cable that connects to the front
message LED. The message LED indicates the booting status. The
LED blinks when the system is in the boot process until the operating
system is loaded.
Hard disk drive activity LED (Red 2-pin IDE_LED)
•
This 2-pin connector is for the HDD Activity LED. Connect the HDD
Activity LED cable to this connector. The IDE LED lights up or flashes
when data is read from or written to the HDD.
System warning speaker (Orange 4-pin SPEAKER)
•
This 4-pin connector is for the chassis-mounted system warning
speaker. The speaker allows you to hear system beeps and warnings.
ATX power button/soft-off button (Light Green 2-pin PWRSW)
•
This connector is for the system power button. Pressing the power
button turns the system on or puts the system in sleep or soft-off mode
depending on the BIOS settings. Pressing the power switch for more
than four seconds while the system is ON turns the system OFF.
Reset button (Blue 2-pin RESET)
•
This 2-pin connector is for the chassis-mounted reset button for system
reboot without turning off the system power.
P5GC-MR System Panel Connector
The system panel connector is color-coded for easy connection.
ASUS P5GC-MR
FPANEL1
SPKROUT GND
GND RESETBTN#
GND NC
+5V GND
NC POWERBTN#
MLED- GND
MLED+ NC
POWERLED-
GND HDLED-
POWERLED+ HDLED+
2-27