Adjusting Default Settings - Horstmann ChannelPlus H17XL Series 2 User Operating Instructions Manual

The ChannelPlus H17XL Series 2 has a number of default settings which are normally
installed. These settings are designed to reduce the need for user intervention upon
installation of the timeswitch. However it is possible to customise the user display by
following the procedures in the following pages. The factory default normally installed are
illustrated below;
Time and Date
Time and calendar
are factory set
Options
The timeswitch has been
set with the current
time and date during
manufacture.
No alteration should be
required to the time and
date. However, if any
modification is required
please refer to the
flowchart on page 9
8

Adjusting Default Settings

Clock Options
Time displayed in
24hr clock format
22:42
Options
24 hour
or
AM/PM
Headings
Channel heading set to
standard installation
i.e. Heating, Hot Water or
None
Options
None
Heating
Water