Table of Contents
Advertisement
Quick Links
CentaurPlus C17 Series 2
User Operating Instructions
Single Channel Timeswitch
The Horstmann CentaurPlus C17 timeswitch will allow up to 3 ON/OFF
settings per day for each day of the week and has a 1 hour manual boost
and advance button to temporarily override current settings.
There is also a programming switch allowing permanent selection of:
OFF/ON/AUTO/ALL DAY.
1
Advertisement
Table of Contents
Related Manuals for Horstmann CentaurPlus C17 Series 2
Summary of Contents for Horstmann CentaurPlus C17 Series 2
- Page 1 User Operating Instructions Single Channel Timeswitch The Horstmann CentaurPlus C17 timeswitch will allow up to 3 ON/OFF settings per day for each day of the week and has a 1 hour manual boost and advance button to temporarily override current settings.
- Page 2 The CentaurPlus C17 Timeswitch The simple instructions contained in this user guide are designed to help with the programming and operation of the unit. 1 14 SET indicator - RUN is the normal position Time of day Switch period symbol SET button BOOST or adjust (-) button ADVANCE or adjust (+) button...
- Page 3 Manual Overrides BOOST FUNCTION - 1 hOUr TeMPOrary OverrIde The boost facility will allow the user to boost the system which is currently ‘OFF’ for 1 hour. To indicate the boost being activated BOOST will be shown on the display for the duration of the boost period.
- Page 4 Programme Override Facilities With the CentaurPlus C17 timeswitch operating in the normal running mode it is possible to alter the functionality of the programme by means of the SELECT button. The options include; aUTO - Timeswitch follows all programmed ‘ON’ and ‘OFF’ times. all day - Timeswitch operates from 1st ‘ON’...
- Page 5 Setting Time of day and date The CentaurPlus C17 series 2 timeswitch has a built in clock and calendar. This will mean that you will need to enter the date as well as the time on initial set up or if the factory re-set has been used.
- Page 6 Setting the On and Off Times To alter these settings please proceed as follows:- Use PlUS Use PlUS Press the Use PlUS SeT button MINUS MINUS until SeT Press Press MINUS Press buttons buttons indicator eNTer eNTer...
-
Page 7: General Information
resetting the Programmer Electronic equipment can in some circumstances be affected by electrical interference. If the programmer’s display becomes frozen or scrambled; or if you wish to revert back to the default time settings please reset by pressing the SET and SELECT buttons together as shown below. - Page 8 The above explanation also applies to your timeswitch, which operates as a single circuit programmer. Email: sales@horstmann.co.uk Website: www.horstmann.co.uk Horstmann Controls Limited, Bristol BS4 1UP Leaflet number P84361 – Issue 1...