Audible Feedback
All buttons on the AS2-RF give an audible confirmation when pressed. A short bleep means
'Yes', a longer buzz means 'No' – the setting/adjustment cannot be done.
Frost Protection
The blue button situated under the flap will initiate the frost protection mode, when
pressed the word 'STANDBY' will appear on the display, the thermostat has been pre-
programmed with a frost protection temperature level of 7°C, this can be adjusted by
using the up and down arrow buttons. Minimum setting 5°C. It is not possible to set a frost
protection temperature above the cool setting.
Part 2 – Programming Mode
The ThermoPlus AS2-RF has been designed for minimal user intervention, however
should any changes to the existing programme be required please press button 6 and 8
simultaneously to enter the programming mode, this will allow you to;
• Check the current time/date/year
• Check the current profile
• Set a new pre-set profile or
• Set a user defined profile
6
PLEASE NOTE; Upon completion of any of the
adjustments above, please ensure that you exit
8
the programming mode by pressing buttons 6
and 8 simultaneously.
5