Remote Control - Sony BDV-N8100W Operating Instructions Manual

Remote control

The following buttons description is only
for the system operation. See "Controlling
Your TV or Other Equipment with the
Supplied Remote Control" (page 53) for
the buttons to operate the connected
equipment.
• Number 5, AUDIO, N, and CH +
buttons have a tactile dot. Use the tactile
dot as a reference when operating the
remote control.
• The buttons printed in yellow are
activated after pressing the TV or STB
operation mode button.
The system automatically
returns to standby mode
If any button on the main unit or remote
control is not pressed within 30 minutes,
the system automatically returns to standby
mode.
A Z (open/close)
1
2
3
4
5
B BLUETOOTH (pages 37, 38)
6
7
8
C Number buttons (pages 48, 53)
Opens or closes the disc lid.
SPEAKERS TVyAUDIO
Selects whether TV sound is output
from the system's speakers or the TV's
speaker(s). This function works only
when you set [Control for HDMI] to
[On] (page 64).
AV "/1 (on/standby) (page 53)
Turns on the TV or other equipment, or
sets it to standby mode.
"/1 (on/standby) (pages 31, 48)
Turns on the system or sets it to
standby mode.
Selects the "BT" function.
When the blue LED indicator lights off
during "BT" function, press to start
pairing or connect to paired Bluetooth
device.
Operation mode buttons
(page 53)
Changes the equipment to be operated
using the remote control.
STB: You can operate a cable box,
digital satellite receiver, digital video
receiver, etc.
TV: You can operate a TV.
BD: You can operate this system.
Enters the title/chapter numbers, preset
station number, etc.
ENTER
Enters the selected item.
US
19