Adjusting To The Preferred Gamma Setting (Custom Gamma) - JVC DLA-RS4810U Instructions Manual

Adjusting to the Preferred Gamma Setting (Custom Gamma)
Gamma setting can be adjusted according to your
preferred video quality.
* During 3D signal input and when "Picture Mode" is set
to "3D", gamma setting cannot be adjusted.
Press the [MENU] button to display
the menu
Select "Picture Adjust" "Advanced"
"Custom Gamma" from the menu
Picture Adjust
Picture Mode
Color Profile
Film 1
Color Temp.
Xenon 1
Gamma Film 1
Dark/Bright Level
Picture Tone
Contrast
0
Brightness
0
Color
0
Tint 0
Advanced Reset
Exit Operate
MENU Select
Select the item to set (Custom 1 to
Custom 3), and press the [OK] button.
Picture Adjust
>>
Custom Gamma
Custom 1
Correction Value
Custom 2
1023
White
Custom 3
Red
Green
Blue
512
Reset
0 50
Operate
Exit Back
MENU Select BACK
Picture Adjust
> Advanced
Film
MPC Level
NR
Custom Gamma
Color Management Off
User Name Edit
Clear Motion Drive Off
Lens Aperture
0
Lamp Power High
Back Exit Operate
BACK MENU Select
D
Gamma Curve
100(%)
Gradation diagram
corresponding to the
gamma curve
Select "Correction Value", and press
the H I keys to select a value for
correction to be based on (initial
value)
For details on the correction value, please refer
to p. 40.
Normal, A, B, C, D, E, F, G, H, 1.8, 1.9, 2.0, 2.1, 2.2,
2.3, 2.4, 2.5, 2.6
The smaller the value, the brighter the dark
areas of the image will become. At the same
time, the bright areas will appear blown out.
The factory settings for Custom 1 to Custom 3
are the same as that for the "Normal" setting.
Select the color to adjust, and press
the [OK] button
Back
BACK Press the H I keys to select the area
to adjust (from the 12 points on the
gamma curve), followed by using the
JK keys to adjust the brightness
After adjustment is complete, press the [OK]
button to confirm the setting.
Selecting "Reset" restores the setting to the
initial value (Normal).
Press the [MENU] button to exit
41