BenQ MX722 User Manual page 18

Mx722 user manual
Hide thumbs Also See for MX722:
Table of Contents

Advertisement

The table below describes the connection methods for different devices, and where the
sound is from.
Device
Audio input port
The projector can play
the sound from...
Audio output port
The selected input signal determines which sound will be played by the projector speaker(s), and which
sound will be output from the projector when AUDIO-OUT is connected. If you select the COMPUTER
1/Y Pb Pr 1 signal, the projector can play the sound received from AUDIO IN 1/MIC. If you select the
COMPUTER 2/Y Pb Pr 2 signal, the projector can play the sound received from AUDIO IN 2/MIC.
The projector can play sound if the connected RJ45 cable or USB cable carries audio signal. There is no need
to connect the audio cable when the Network Display source is selected.
About the microphone input
If you wish to use a microphone, connect a 3.5 mini jack cable microphone to the
projector.
You can use a wireless microphone as long as a wireless module is attached to the
projector's microphone input jack and it works well with the associated devices. To
ensure a quality use of the wireless microphone, it is recommended that your
microphone conforms to the specifications listed in the table below.
Signal
Microphone
To adjust microphone volumes, directly set microphone volume levels in the SYSTEM
SETUP: Advanced > Audio Settings > Microphone Volume menu.
To make the microphone input available when the projector is in standby mode, turn
on the SYSTEM SETUP: Advanced > Standby Settings > Microphone
function.
If the microphone is not working, check the volume setting and cable connection.
You might get feedback noise from the microphone when you are too close to the
speaker(s) of the projector. Move the microphone away from the speaker(s) of the
projector. The greater volume you require, the greater distance you need to be away
from the speaker(s) to prevent the noise.
18
Connection
PC/Component Video
AUDIO-IN-1/AUDIO-
IN-2
AUDIO-IN-1/AUDIO-
IN-2/MIC
AUDIO-OUT
Parameter
Transducer Principle
Impedance
Frequency response
Video/S-Video
AUDIO (L/R)
• MIC
• AUDIO (L/R)/MIC
AUDIO (L/R)/MIC
• AUDIO-IN-1/MIC
• AUDIO-IN-2/MIC
AUDIO-OUT
Min
Type
Max
300
1K
600
16k
Microphone
MIC
AUDIO-OUT
Dynamic
ohm
Hz

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx818st

Table of Contents