Section 9: Physical And Chemical Properties; Section 10: Stability And Reactivity - 3M Designjet H35000 - Commercial Printer Material Safety Data Sheet

3M MATERIAL SAFETY DATA SHEET 3M(TM) Thinner CGS-80
8.2.2 Skin Protection
Avoid skin contact.
Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Butyl Rubber.
8.2.3 Respiratory Protection
Avoid breathing of vapors, mists or spray.
Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with
OSHA regulations: Half facepiece or fullface air-purifying respirator with organic vapor cartridges. Consult the current 3M
Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance.
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
8.3 EXPOSURE GUIDELINES
None Established

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

Specific Physical Form:
Odor, Color, Grade:
General Physical Form:
Autoignition temperature
Flash Point
Flammable Limits - LEL
Flammable Limits - UEL
Boiling point
Density
Vapor Density
Vapor Pressure
Specific Gravity
pH
Melting point
Solubility in Water
Volatile Organic Compounds
Percent volatile
VOC Less H2O & Exempt Solvents

SECTION 10: STABILITY AND REACTIVITY

Stability: Stable.
Materials and Conditions to Avoid: Strong oxidizing agents
_________________________________________________________________________________________________
10/21/2005
Liquid
Solvent Odor, Clear Color
Liquid
680 ºF
211 ºF [Test Method: Closed Cup]
0.9 %
19.4 %
423 ºF
1.01 g/ml
> 1 [Ref Std: AIR=1]
0.05 mmHg [@ 20 ºC]
1.01 [Ref Std: WATER=1]
Not Applicable
Not Applicable
Complete
1,010 g/l
100 %
1,010 g/l
Page 4 of 7