Table of Contents
Advertisement
MOISTURE & HUMIDITY PROBLEMS
The addition of moisture to the sublimation process can cause unwanted results. Under normal
circumstances, the small amount of moisture that can accumulate in your paper is absorbed directly into
the transfer substrate; however hard substrates like metal and ceramic are unable to absorb excess
moisture. Some of problems that are attributed to moisture include: color shifting (colors lose accuracy),
bleeding of the image, and uneven transfer of solid filled areas
To avoid these problems
Keep your paper in a dry place.
If you suspect moisture, set the paper on your press for a few seconds. Do not press it. Just
expose it to the warmth. The heat radiating from the press should help evaporate most of the
moisture.
To eliminate moisture in fabric, press the fabric for 10 seconds before doing the heat transfer.
Use an absorbent cloth or fresh, non-textured paper towel behind the transfer sheet to absorb the
moisture.
Advertisement
Table of Contents
