GE JBP80 Use And Care & Installation Manual page 18

FEATURES OF YOUR OVEN CONTROL
I I ll:l.r-l l' l
1. BAKE. Press this pad to select the bake function.
2. CONV. BAKE. Press this pad to select baking with
convection.
3. PROBE. Press this pad when using the probe to
cook food.
4. PROGRAM STATUS. Words light up in the
display to indicate what is in time display.
Programmed information can be displayed at any
time by pressing the pad of the operation you want
to see. For example, you can display the current
time of day while the timer is counting down by
pressing the CLOCK pad.
5. TIME DISPLAY. Shows the time of day, the times
set for the timer or automatic oven operation.
6. OVEN OR PROBE TEMPERATURE AND
BROIL DISPLAY. Shows the oven temperature,
probe temperature or broil setting.
7. FUNCTION INDICATORS. Words light up
to show whether the oven is in the bake, broil,
convection bake, self-clean mode or set mode
or if the probe is selected.
8. COOK TIME. Use this pad for Timed Baking,
Timed Convection Baking and Timed Convection
Roasting operations.
9. TIMER. Press this pad to select the timer function.
The timer does not control oven operations. The
timer can time up to 9 hours and 55 minutes.
To set the timer, first press the TIMER pad.
Then press the INCREASE or DECREASE pad to
chauge the time.
To caucel the timer, press and hold the TIMER pad
until the word "TIMER" disappears from the display.
ilk BROIL. Press this pad to select the broil function.
11. CONY. ROAST. Press this pad to select roasting
with convection.
12. AUTO SELF CLEAN. Press this pad to select
the self-cleaning function. See the Operating the
Self-Cleaning Oven section.
13. INCREASE. Short taps to this pad increase the
time or temperature by small amounts. Press and
hold the pad to increase the time or temperature
by larger amounts.
14. DECREASE. Short taps to this pad decrease the
time or temperature by small amounts. Press and
hold the pad to decrease the time or temperature
by larger amounts.
15. CLEAR/OFE Press this pad to cancel all oven
operations except Clock and Timer.
16. STOP TIME. Use this pad along with the COOK
TIME or AUTO SELF CLEAN pad to set the oven
to start and stop automatically at a time you select.
17. CLOCK. To set the clock, first press the CLOCK
pad. Then press the INCREASE or DECREASE
pad to set the time of day. Press the CLOCK pad
to start.
It" "F-and a number" flash in the display and the
oven control signals, this indicates function error
code. tf function error code appears during the self-
cleaning function, cheek the oven door latch the
latch handle may have been moved, even if only
slightly, from the latched position. Make sure
handle is [o the right as far as it will go. Press the
CLEAR/OFF pad. Allow the oven to cool for one
hour. If function error code repeats, disconnect
power to the range and call for service.
18