Page 1
ITEM# 1-1-37001 Crenr Cnrnes in l - dgrnn opciones de juno Assem ly odel www.eastpoi ntsports.com TWO OR MORE ADULTS REQUIRED FOR ASSEMBLY...
Page 2
FETY INSTRUCTI Read all instructions - All the safety and operating instructions should be read carefully before this Hover Hockey table can be operated or played. Caution - This is not a toy and is intended for use by or under the supervision of adults.
Page 3
Lay out al parts before you begin Please review the parts identifier and make sure that you have all parts before beginning assembly. If any questions or issues, please contact us at 1-973-585-4747 BEFORE returning the product to the original place of purchase.
Page 4
ease inspect your piayfiel Your Cabinet (holds Billiard table and Hockey Playfield) is NOT replaceable. Any damage that exists to your playfield is not reparable under warranty. If your play6eld is damaged, the entire game must be returned to the original place of purchase for an exchange.
Page 5
TOOLS Required • Electric Screwdriver or Power Driver • 1 - Phillips Head Screwdriver (Standard Size) - Not Included CAUTION - DO NOT OVER TIGHTEN. OverTightening will result in irreparable damage to the product. If using, • 1 - HexWrench- Included please make sure that the tool is set to a very low torque to prevent damage to the product.
Page 6
Components cont. 7_)Lock Pin (_ _ Leg Leveler Leg Pedestal _Ball Catcher Box }_) Ball Board - Lower _Leg - End Panel _2_-_ •., _2T °°_-°_ .., _ Bali Board-Lower 3_Leg - Side Panel J Table Top -Cabinet _Cue Hook _Top End Panel 5_ Hockey Scorer...
Page 9
LY INSTRUCTI BEFORE ") BEFORE BUILDING- Please inspect your playfieid and layout all your parts Your Cabinet (holds Billiard table and Hockey Playfield) is NOT replaceable. Any damage that exists to your playfield is not reparable under warranty. If your playfield is damaged, the entire game must be returned to the original...
Page 11
STEP 6 ") Repeat for Leg- End Panel both ends. Ball Board- Lower Screw-Wood- 4 x44.5mm (. 7 Repeat for Step 5 Assembly both ends. Step 6 Assembly Step 6 Assembly ,"11 Screw-Wood-4x 12mm Step 5 Assembly STEP 8 Repeat for Step 7 Assembly both ends.
Page 12
semblies\ Step 8 Assembly Make SUre hole Leg - Side Panel in barrel nut is facing the bolt. Otherwise it will not go in all the way. Barrel N ut- 8turn Repeat for both sides. BoIt- Rex Head- 8 x 63.Smrn Washer- Metal- 8mrn TableTop -Cabinet Repeat for...
Page 13
Repeat Step 1 1 Assembly both ends. Top End Panel Do not over tighten. Screw-Wood- 4 x44.5mm To complete Step 12 Assembly this step, the hockey side Hockey Scorer must Cue Hook facing up. If not, disengage 4 Lock Pins, Swivel, then re-engage 4 Lock Pins.
Page 15
Ifyouhaveanyquestions r egarding this Limited Warranty or theoperationofthe Product, youmaycallor write us. ALLWARRANTY CLAIMS MUST BEACCOMPANIED BY A COPY OFTHESALES R ECEIPT/PROOF OFPURCHASE. REPORT A NYDEFECTS TO: EASTPOINT 628 ROUTE 1 O, SUITE #5 WHIPPANY, NEW JERSEY 07981 • 1-973-585-4747...
Page 16
It must be applied to the cloth directly and then the table top can be wiped in a lengthwise direction. EASTPOINT www.eastpoi ntsports.com 628 ROUTE 10, SUITE #5 WHIPPANY, NEW JERSEY 07981 • 1-973-585-4747...