GE PKD915 Owner's Manual And Installation Instructions page 10

Installation of the warming drawer.
Read these instructions completely and carefully.
Before YouBegin
IMPORTAN7_Save these instructions for the
local electrical inspector's use.
IMPORTAN7_OBSERVEALL GOVERNING CODES
AND ORDINANCES.
NOTE TO INSTALLER:Leave these instructions
with the appliance after installation is completed.
NOTE TO CONSUMER: Keep this Owner's
Manual and Installation Instructions for
future use.
NOTE."This appliance must be properly
grounded.
NOTE."Insure that the power cord does not
contact the hot surfaces on the bottom of
ovens, cooktops, or any other appliance.
ProductDimensions
I_ 23¼"
!0
!0
!0
_0
_0
26¼" ---_
includinghandle
9" 10½"
DimensionA
27" Drawer 30" Drawer
263/4" [ 30"
CustomPanel Kits
ZXD27BJThis
kit provides for the installation
of a custom fl'ont panel on 2 / w](le models.
ZXD3OB--This kit provides fi)r the installation
t, *
of a custom fi'ont pand on 30 wide models.
Tools Needed
2 x4 or 2 x 2 lmnber fi>r trainers and brace
Wood screws and adhesive or other hardware
fi)r installing rui]i]eis or shelf to support
W_I F/lleI" drawei:
Runners m ustbe level,r/)idly mounted and
capable
of
supporting 150 pounds.
; S_l w
i,evel
Drill and 1/16" bit
Phillips screwdriver
10