Table of Contents
Advertisement
Camera
Electrostatic
malfunctions
discharge
during use
interfered with
the camera
LCD
The LCD does
not light.
Everything on
Camera
the LCD
firmware defect
flashes and "7"
or "8" is
displayed
LCD displays
Incompatible
"E2" when a
file system on
SD memory
SD memory
card is inserted
card
Check computer
Check if the camera is
connected to the PC
If you turn the power off
with the LCD off, the
LCD screen is still set to
OFF the next time the
power is turned on.
Sync firmware with PC
Format SD card
Connect the camera to
the PC with the USB
cable and select [My
Computer] – [Control
Panel] – [System] –
[Device Manager]. In
the [Device Manager]
window delete
[Compose USB
device] or [Unknown
device] in [Other
devices]. Then
disconnect the camera
and install the
software before
reconnecting the
camera to the PC.
Turn off the camera
and then turn it back
on. If connected to
the PC disconnect the
camera from the USB
cord, and turn it off
then on again.
Press the LCD button
once to turn on the
LCD.
If the "Camera
firmware is out of
sync. Update
recommended.
Update firmware?"
message appears when
you connect the
camera to your PC
with the USB cable,
click the [Yes] button
to update your
firmware.
See Deleting an
image/Formatting
flash memory or SD
card in section 3
19
Advertisement
Table of Contents
