Adjusting The Seat; Gas And Oil - Cub Cadet LTX1042 Operator's Manual

Hydrostatic lawn tractor
Hide thumbs Also See for LTX1042:
Table of Contents

Advertisement

Available languages

Available languages

Adjusting the Seat
To adjust the position
of the seat, pull up and hold the seat
adjustment
lever. Slide the seat forward
or rearward
to the
desired position;
then release the adjustment
lever. Make sure
seat is locked into position
before operating
the tractor. See
Fig. 3-5.
//
k_
j
Figure 3-S
Gasand 0il
WARNING!
Before operating
the tractor,
make sure
the seat is engaged
in the seat-stop.
Engage the
parking
brake. Stand behind the machine
and pull
back on seat until it clicks into place.
The fuel tank is located
under the hood and has a capacity
of
three and-a-half
gallons. Remove the fuel cap by turning
it
counterclockwise.
Use only clean, fresh (no more than 30 days
old), unleaded
gasoline.
Do not overfill
the tank.
The tractor is equipped
with a tethered,
ratcheting
cap, STOP
filling tank once fuel is seen inside the filler neck. This ensures
that a proper expansion
volume
is created.
Do NOTtop
off tank.
See Figure 3-6.
F
J
Figure 3-6
i_ll
WARNING!
Use extreme
care when handling
gasoline. Gasoline
is extremely
flammable
and the
vapors are explosive.
Never fuel the machine
indoors or while the engine
is hot or running.
Extinguish
cigarettes,
cigars, pipes and other
sources of ignition.
NOTE: Your tractor is shipped
with oil in the engine.
However,
you MUST check the oil level before operating.
i_ll
CAUTION:
Always check the engine oil level before
each use as instructed
in the separate
Engine
Owner's Manual. Add oil as necessary. Failure to do
so may result in serious damage to your engine.
SECTION 3 -- ASSEMBLY & SET-UP
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ltx1045Ltx1046m

Table of Contents