Cub Cadet GTX1054 Operator's Manual page 29

10. Pull the right side of the belt and place the narrowV side of
the belt into the PTO pulley. See Fig. 7-9.
J
Figure 7-g
11.
While holding the belt and pulley together, rotate the
pulley to the left (See Fig. 7-9). Continue holding and
rotating the pulley and belt until the belt is fully rolled into
the PTO pulley.
Changingthe TransmissionDriveBelt
Several components must be removed and special tools used in
order to change the tractor's transmission drive belt. See your
Cub Cadet dealer to have the transmission drive belt replaced.
SECTION 7 -- SERVICE 29