I Creating scenarios
Scenarios are created with the special [EasyMP software] software.
Install the EasyMP Software
G Operating environment
Check to ascertain that this software can be operated on the computer in use.
Computer
CPU
Memory capacity
Required hard disk space
Display
G Installation
Windows 98 screens are used here for explanatory purposes, but the procedures are the same
with Windows 95.
1
Start up Windows and set the EasyMP Software CD-ROM in place.
The set-up program will automatically start.
Point
If the setup program will not start, open the [Specify and execute files] dialog box with
[Start] - [Specify and execute files], and then execute [CD-ROM Drive name: \SETUP].
2
Select the language and then click on the [OK] button.
The installation procedures will commence. Follow the instructions on all subsequent
screens to proceed with the process.
Point
Select [EMP SlideMaker] with [Settings] - [Control Panel] - [Add and Delete Applications],
and then execute [Add and Delete] to uninstall the program.
86 - Creating scenarios
Computers that operate on Windows 95/98/NT4.0/2000/Me platforms
Pentium 166MHz or higher (Pentium II 300MHz is recommended)
32 Mbyte or more (96MB or more is recommended)
12 MB or more
Resolution of VGA (640 x 480) or higher