Advertisement
Program Change ON/OFF
Normally the instrument will respond to MIDI program change numbers received from an external keyboard or other MIDI device,
causing the same numbered voice to be selected on the corresponding channel (the keyboard voice does not change). The instrument
will normally also send a MIDI program change number whenever one of its voices is selected, causing the same numbered voice or
program to be selected on the external MIDI device if the device is set up to receive and respond to MIDI program change numbers.
This function makes it possible to cancel program change number reception and transmission so that voices can be selected on the
instrument without affecting the external MIDI device.
While holding down the [DEMO] button, press and hold the [METRONOME ON/OFF] button,
then press one of the B5 key. Pressing the B5 key repeatedly toggles between Program Change On
and Off.
Control Change ON/OFF
Normally the instrument will respond to MIDI control change data received from an external MIDI device or keyboard, causing the
voice on the corresponding channel to be affected by pedal and other "control" settings received from the controlling device (the key-
board voice is not affected). The instrument also transmits MIDI control change information when the pedal or other appropriate con-
trols are operated. This function makes it possible to cancel control change data reception and transmission so that, for example, the
pedal of the instrument and other controls can be operated without affecting an external MIDI device.
While holding down the [DEMO] button, press and hold the [METRONOME ON/OFF] button,
then press one of the C6 key. Pressing the C6 key repeatedly toggles between Control Change On
and Off.
NP-31
NP-11
B5
NP-31
NP-11
C6
MIDI Functions
NOTE
For information on program change num-
bers for each of the Voices of the instru-
ment, refer to page 4.
NOTE
Default setting: ON
NOTE
For information on control changes that
can be used with the instrument, refer to
page 4.
NOTE
Default setting: ON
NP-31/NP-11 MIDI Reference
3
Hide quick links:
Advertisement
