Adjustments - Craftsman 247.29934 Operator's Manual

ADJUSTMENTS
Prior to operatingyour tiller,carefullyreadand followall instructions
below.Performall adjustmentsto verifyyourtiller isoperatingsafely
_and propery.
Checkthe adjustmentof the wheels:
Thetiller isshippedwith the wheelsadjustedso thatthe machinesits
level.Thewheels needto be adjustedto meetyourtillingneedsbefore
operation.This adjustmentismadeby removingtheclevis pin fromthe
wheelyokeand raisingthe wheelsto thedesiredheight.See Figure8.
Checkthe adjustmentof the forwardclutchcableas follows:
1. Disconnectand groundthe spark plugwire againsttheengine.
2. Adjustthe cableby looseningthe hexnut. See Figure9.
3. Turnthe cablecollar sectionone or two turnsto increaseor
decreasetensionon thecable. See Figure10.
4. Retightenthe lock nut againstthe cablecollar.See Figure11.
5. Withthe forwardfine engagement h andlein the neutral(released)
position,pull the starterrope severaltimes. Thetines shouldnot
turn.
6. If they turn forwardor in reverse,adjustthe clutchcableto
decreaseor increasetensionusingthe previousstepslisted.
7. Checkagain for correcttensionon the clutchcable.
f
Wheel Yoke
\
Pin
Figure8
Depth
Stake
J
f
Figure9
J
f
Figure10
Nut
10
Figure11
J