Craftsman 113.179715 Owner's Manual page 8

Drum/Wheel Assembly (cont.)
8. Insert the caster stem into the socket of
Removing Handle
the caster foot as shown. (Front caster Press and hold release buttons as shown.
only). While firmly pushing in release buttons,
9. Push on the caster until the ball on the pull handle upwards to remove (see
caster stem is inserted all the way into illustration).
the socket. You will be able to hear the
ball snap into the socket and the caster
will swivel easily when positioning is
correct.
Socket
Cast er Stem
aster Ball
Installing Handle
Press and hold release buttons while
installing handle into handle receptacles in
drum (See illustration).
Installing Accessory Storage
Bag
1. Install accessory storage bag as shown.
,/y-Storage Bag Storag e Bag
NOTE: An audible snap of release buttons
indicates successful engagement of
handle.
Release Buttons