Chassis Intrusion Detection; Power Management Features; Acpi; Hardware Support - Intel D945GCPE - Desktop Board Motherboard Product Manual

Chassis Intrusion Detection

The board supports a chassis security feature that detects if the chassis cover has
been removed. The security feature uses a mechanical switch on the chassis that can
be connected to the chassis intrusion header on the desktop board. See Figure 1, S on
page 11 for the location of the chassis intrusion header.

Power Management Features

Power management is implemented at several levels, including:
• Software support through the Advanced Configuration and Power Interface (ACPI)
•

Hardware support:

― Power connectors

― Fan headers
― LAN wake capabilities
― Instantly Available PC technology (Suspend to RAM)
― +5 V standby power indicator LED
― Wake from USB
― Wake from PS/2 keyboard/mouse
― Power Management Event signal (PME#) wakeup support

ACPI

ACPI gives the operating system direct control over the power management and Plug
and Play functions of a computer. The use of ACPI with the desktop board requires an
operating system that provides full ACPI support.
Hardware Support
Power Connectors
ATX12V-compliant power supplies can turn off the computer power through system
control. When an ACPI-enabled computer receives the correct command, the power
supply removes all non-standby voltages.
When resuming from an AC power failure, the computer returns to the power state it
was in before power was interrupted (either on or off). The computer's response can
be set by using the Last Power State feature in the BIOS Setup program's Boot menu.
The desktop board has two power connectors. See Figure 22 on page 45 for the
location of the power connectors.
Desktop Board Features
19