Main Memory - Intel D865PCK Product Manual

Intel Desktop Board D865PCK Product Guide

Main Memory

NOTE
To be fully compliant with all applicable Intel
board should be populated with DIMMs that support the Serial Presence Detect (SPD) data
structure. If your memory modules do not support SPD, you will see a notification to this effect on
the screen at power up. The BIOS will attempt to configure the memory controller for normal
operation.
The desktop board supports system memory as defined below:
•
Dual channel and up to four 184-pin Double Data Rate (DDR) SDRAM Dual Inline Memory
Module (DIMMs) connectors with gold-plated contacts.
•
Unbuffered, non-registered DIMMs
•
Serial Presence Detect (SPD) memory only
•
Support for Suspend to RAM (STR), S3 ACPI state
•
Non-ECC DDR
•
2.5 V memory
Related Links
Go to the following links or section in this manual for more information about:
•
The latest list of tested memory,
•
SDRAM specifications,
•
Installing memory, page 28 in Chapter 2
14
®
SDRAM memory specification addendums, the
http://support.intel.com/support/motherboards/desktop/
http://www.intel.com/technology/memory/pcsdram/spec/