2-3
MB Intelligent Tweaker(M.I.T.)
Advanced Clock Calibration
IGX Configuration
CPU Clock Ratio
CPU NorthBridge Freq.
CPU Host Clock Control
x CPU Frequency(MHz)
PCIE Clock(MHz)
HT Link Width
HT Link Frequency
Set Memory Clock
x Memory Clock
DRAM Configuration
******** System Voltage Optimized ********
System Voltage Control
x DDR3 Voltage Control
x NorthBridge Volt Control
x SouthBridge Volt Control
x CPU NB VID Control
x CPU Voltage Control
hi : Move
Enter: Select
F5: Previous Values
Normal CPU Vcore
hi : Move
Enter: Select
F5: Previous Values
• Whether the system will work stably with the overclock/overvoltage settings you made is depen-
dent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in
damage to CPU, chipset, or memory and reduce the useful life of these components. This page is
for advanced users only and we recommend you not to alter the default settings to prevent system
instability or other unexpected results. (Inadequately altering the settings may result in system's
failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)
• When the System Voltage Optimized item blinks in red, it is recommended that you set the
System Voltage Control item to Auto to optimize the system voltage settings.
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
MB Intelligent Tweaker(M.I.T.)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
MB Intelligent Tweaker(M.I.T.)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Press Enter]
[Press Enter]
[Auto]
2800Mhz
[Auto]
2000Mhz
[Auto]
200
[Auto]
[Auto]
[Auto]
2000Mhz
[Auto]
x6.66
1333Mhz
[Press Enter]
[Auto]
Auto
Auto
Auto
Auto
Auto
F10: Save
1.3500V
F10: Save
- 37 -
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
BIOS Setup