Samsung SGH-G600 Service Manual page 69

9
1) Screw 4 points on Lower assy'.
1) Be careful not to make scratch and molding damage!
2) TORQE (1.1 ± 0.1 Kgf·Cm)
1) Insert the 2 points screw rubbers
11
the
into lower case
1) Be careful not to make scratch and molding damage!
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
10
Fold
1) slide FPCB together
2) Attach slide to the lower guide
holes.
1) Be careful not to make scratch and molding damage!
2) Be careful not to make the FPCB damage!
1) Insert the FPCB into front FPCB hole.
12
2) Inset front holes into lower hooks.
1) Be careful not to make scratch and molding damage!
2) Be careful not to make the FPCB damage!
11-7