11-2. Assembly Instructions
1) Insert the camera FPCB into connector.
1
1) Be careful not to make scratch and molding damage!
2) Be careful not to make the camera FPCB damage!
1) Insert sub key FPCB into connector.
3
1) Be careful not to make scratch and molding damage!
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
1) Insert the slide FPCB into connector.
2
1) Be careful not to make scratch and molding damage!
2) Be careful not to make the FPCB damage!
3) Be careful make right side of FPCB.
1) Attach tape to the slide connector.
4
2) Attach tape to FPCB. (Guide line)
1) Be careful not to make scratch and molding damage!
11-5