Related Manuals for Emerson Turbo HR2003
Summary of Contents for Emerson Turbo HR2003
- Page 1 WATER RESISTANT PERSONAL STEREO RADIO with DIGITAL TUNING AM/FM/TV/WEATHER BANDS OWNER’S MANUAL HR2003 Visit our web site at www.emersonradio.com HR2003_ib040903.p65 9/4/2003, 11:36...
- Page 2 This product was manufactured using the highest quality components and standards of workmanship. It was tested by Emerson inspectors and found to be in perfect working order before it left our factory. However, there is always the chance that some problem may occur because of rough handling during shipment to the retail store or to the final consumer.
-
Page 3: Important Notes
IMPORTANT NOTES This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 4: Preparation For Use
PREPARATION FOR USE POWER SOURCES This personal stereo radio with AM/FM/TV and Weather Band digital tuner is designed to operate on one alkaline “AAA” battery, not included. Attempting to operate this unit on any other power source may cause damage to the unit and such damage is not covered by your warranty. - Page 5 ARM-BAND STRAP INSTALLATION This radio is supplied with an accessory arm-band strap to secure the radio on your arm while you are jogging or performing other strenuous activities. To install the arm-band strap, thread the strap through the two slots on the back ®...
-
Page 6: Location Of Controls And Indicators
LOCATION OF CONTROLS AND INDICATORS FRONT CABINET 1.) BAND (AM/FM/TV/Weather) Button. 2.) POWER (SLEEP) Button. 3.) MEMORY/CLOCK SET Button. 4.) SNOOZE Button. 5.) ALARM Button. 6.) MUTE Button. 7.) TUNER Display. 8.) PRESET UP Button. 9.) PRESET DOWN Button. 10.) TUNING + /CLOCK SET–H(Hour) Button. 11.) TUNING –... -
Page 7: Multifunction Lcd Display
MULTIFUNCTION LCD DISPLAY BASS PRESET 1.) PRESET Indicator. 2.) BASS – Bass Boost Indicator. 3.) SLEEP Indicator. 4.) HOLD “ ” Indicator. 5.) Alarm Indicator. 6.) Battery Level Indicator. 7.) Radio Frequency / Channel Display. 8.) AM/PM Indicators. 9.) Band Indicators – WB / TV / FM / AM. 10.) Preset Memory Number Display. - Page 8 OPERATING INSTRUCTIONS • Make sure the battery is installed correctly. • Set the VOLUME control to a low level. • Fully unwind the headphone cord and connect the headphone plug to the PHONES jack. The plug must be fully inserted into the jack, otherwise the sound may be intermittent.
-
Page 9: Hold Switch
HOLD Switch “ ” The HOLD switch locks all of the other controls BASS PRESET buttons. If you are carrying the radio in a backpack, handbag, gym bag, etc, set the HOLD switch to the ‘ On’ position to prevent it from turning ‘... -
Page 10: Setting The Clock
SETTING THE CLOCK The clock must be set with the radio ‘ Off’ . 1.) Press the MEMORY/CLOCK SET button for at least two seconds. The time display begins to flash. 2.) While the display is flashing press the TUNING + /CLOCK SET-H button to adjust the hour. -
Page 11: Listening To Radio
LISTENING TO RADIO Information This radio receives normal AM and FM broadcasts plus the TV sound from VHF TV stations 2 through 13. In addition it receives all 7 NOAA weather frequencies so you can listen to continuous National Weather Service broadcasts. Please note that the weather channels are identified as “1 ch”... -
Page 12: Operation
OPERATION 1.) Make sure that the HOLD button is in the ‘ Off’ position. (The HOLD indicator does not appear in the display.) 2.) Press the POWER button to turn the radio ‘ On’ . An AM, FM, TV or Weather Band frequency will appear in the display. -
Page 13: Presetting Stations In The Tuner Memory
PRESETTING STATIONS IN THE TUNER MEMORY You may preset up to 42 of your favorite stations (20 FM, 10 AM, 7 TV, and 5 Weather) in the tuner memory for easy recall at any time. 1.) Tune to the first station that you wish to memorize. Example: FM 103.5 MHz. When the desired frequency appears in the display depress and hold the MEMORY/CLOCK SET button for at least 2 seconds. -
Page 14: Recalling Preset Stations
RECALLING PRESET STATIONS 1.) Turn the radio ‘ On’ and press the BAND button to select the desired band. 2.) Press the PRESET UP or PRESET DOWN buttons to scroll through the preset numbers. CHANGING A PRESET STATION To change a preset station simply tune to the new station that you wish to memorize, press the MEMORY/CLOCK SET button, and then select the number of the memory you wish to change by pressing the PRESET UP or PRESET DOWN buttons. -
Page 15: Setting The Alarm Timer
SETTING THE ALARM TIMER You can set the Alarm Timer to turn the radio on automatically. However there is no buzzer alarm in this model so you must have the headphones on to hear the radio alarm. The Alarm Time can only be set while the radio is ‘ Off’ . 1.) Press the ALARM button. -
Page 16: Sleep Timer
SNOOZE/REPEAT ALARM After the radio turns ‘ On’ automatically you may press the SNOOZE button to stop the radio for a few more minutes. The radio stops but the Alarm indicator continues to flash. After 5 minutes the radio turns ‘ On’ again. SLEEP Timer You can use the Sleep timer to shut the radio ‘... -
Page 17: Care And Maintenance
FOR CUSTOMER SERVICE, PLEASE WRITE TO: HR2003_ib040903.p65 TO FIND THE LOCATION AND PHONE NUMBER OF YOUR NEAREST SERVICE CENTER PERMITTED TO PERFORM WARRANTY... 1-800-695-0098 PLEASE CALL: 1-800-898-9020 Emerson Radio Corp. Consumer Affairs Dept. 1901 Diplomat Drive, Farmers Branch, TX 75234. 9/4/2003, 11:12... -
Page 18: Limited Warranty
For repair or replacement, pack your unit in a padded box, enclose your check or money order payable to Emerson Radio Corp. in the amount of $5.00 (not required by California residents) to cover shipping and handling costs, and enclose a copy of your proof of purchase. - Page 19 EMERSON RADIO CORP. EMERSON Part No. : 16-2903 304-01 PRINTED IN CHINA HR2003_ib040903.p65 9/4/2003, 11:12...