Related Manuals for Emerson HR2227BL
Summary of Contents for Emerson HR2227BL
- Page 1 WATER RESISTANT PERSONAL STEREO RADIO with DIGITAL TUNING OWNER’ S MANUAL HR2227BL Visit our web site at www.emersonradio.com HK2227BL_120203.p65 2/12/2003, 14:21...
- Page 2 If, after reading this Manual, you experience any problems with the operation of this product, please refer to the instructions for obtaining service at the end of this Manual. Emerson and Emerson retailers are committed to your satisfaction. Once again, thanks for purchasing this Emerson audio product.
-
Page 3: Important Notes
IMPORTANT NOTES This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 4: Preparation For Use
PREPARATION FOR USE POWER SOURCES This personal stereo radio with AM/FM digital tuner is designed to operate on two alkaline “AAA” batteries, not included. Attempting to operate this unit on any other power source may cause damage to the unit and such damage is not covered by your warranty. - Page 5 ARM-BAND STRAP INSTALLATION AND REMOVAL This radio is supplied with an accessory arm-band strap to secure the radio on your arm while you are jogging or performing other strenuous activities. To install the arm-band strap, slide the arm-band strap bracket into bracket holder ®...
-
Page 6: Location Of Controls And Indicators
LOCATION OF CONTROLS AND INDICATORS FRONT CABINET 1.) ALARM ON/OFF Button. 2.) SNOOZE Button. 3.) BASS BOOST Button. 4.) LCD Display. 5.) LOCK Switch. 6.) BASS ON LED Indicator. 7.) MODE Button. 8.) MEM. (Memory) DOWN Button. 9.) BAND (AM/FM) Button. 10.) MEM. -
Page 7: Multifunction Lcd Display
MULTIFUNCTION LCD DISPLAY 1.) AM (AM Radio Band) Indicator. 2.) FM (FM Radio Band) Indicator. 3.) AM (AM Time) Indicator. 4.) PM (PM Time) Indicator. 5.) AL (Alarm) Indicator. 6.) FM ST (Stereo) Indicator. 7.) LOCK Indicator. 8.) Battery Level Low 9.) CH (Channel) Indicator. - Page 8 OPERATING INSTRUCTIONS • Make sure the batteries are installed correctly. • Set the VOLUME control to a low level. • Fully unwind the headphone cord and connect the headphone plug to the PHONES jack. The plug must be fully inserted into the jack, otherwise the sound may be intermittent.
-
Page 9: Lock Switch
LOCK Switch The LOCK switch locks all of the other controls buttons. If you are carrying the radio in a backpack, handbag, gym bag, etc, set the LOCK switch to the ‘ On’ position to prevent it from turning ‘ On’ accidentally by something pressing against the POWER button. -
Page 10: Setting The Clock
SETTING THE CLOCK Note: The clock can be set with the radio ‘ Off’ . Or if the radio is ‘ On’ , press the MODE button once to the clock mode. 1.) Press the MODE button for at least two seconds. The time display begins to flash. -
Page 11: Listening To Radio
LISTENING TO RADIO BASS BOOST Button Press the BASS BOOST button for added Bass response. The BASS ON LED indicator lights. Press again to cancel Bass Boost and resume normal sound. The BASS ON LED indicator goes off. OPERATION 1.) Make sure that the LOCK button is in the ‘ Off’ position. (The LOCK indicator does not appear in the display.) 2.) Press the POWER button to turn the radio ‘... -
Page 12: Presetting Stations In The Tuner Memory
PRESETTING STATIONS IN THE TUNER MEMORY You may preset up to 20 of your favorite stations (10 FM, 10 AM) in the tuner memory for easy recall at any time. 1.) Tune to the first station that you wish to memorize. Example: FM 103.5 MHz. - Page 13 CHANGING A PRESET STATION To change a preset station simply tune to the new station that you wish to memorize, press the MEMORY button, and then select the number of the memory you wish to change by pressing the MEM UP or MEM DOWN buttons. When the desired preset number appears in the display press the MEMORY button once more to enter the new station in the desired preset memory number.
-
Page 14: Setting The Alarm Timer
SETTING THE ALARM TIMER You can set the Alarm Timer to turn the Buzzer ‘ On’ automatically. However you must have the headphones on to hear the Buzzer sound. 1.) Press the MODE button once while the radio is ‘ Off’ . Or press the MODE button twice if the radio is ‘... - Page 15 6.) Press the ALARM ON/OFF button to activate the alarm. The “AL” indicator appears in the display. 7.) At the selected alarm time the buzzer will turn ‘ On’ automatically. The buzzer will sound for 1 hour and then shut off automatically. To shut the buzzer off sooner press the ALARM ON/OFF button once.
-
Page 16: Care And Maintenance
FOR CUSTOMER SERVICE, PLEASE WRITE TO: Farmers Branch, TX 75234. HK2227BL_120203.p65 TO FIND THE LOCATION AND PHONE NUMBER OF YOUR NEAREST SERVICE CENTER PERMITTED TO PERFORM WARRANTY... 1-800-695-0098 PLEASE CALL: 1-800-898-9020 Emerson Radio Corp. Consumer Affairs Dept. 1901 Diplomat Drive, 2/12/2003, 14:21... -
Page 17: Limited Warranty
For repair or replacement, pack your unit in a padded box, enclose your check or money order payable to Emerson Radio Corp. in the amount of $5.00 (not required by California residents) to cover shipping and handling costs, and enclose a copy of your proof of purchase. - Page 18 EMERSON Part No. 16-2915 PRINTED IN CHINA 312-01 HK2227BL_120203.p65 2/12/2003, 14:21...