Dual Mono Setting; Dynamic Range Setting - Emerson AV301 Owner's Manual

Dual Mono Setting

Dual Mono Setting Dual Mono Setting
Dual Mono Setting Dual Mono Setting
Path: Main Page
--DOLBY DIGTAL SETUP--
DUAL MONO
DYNAMIC RNG
MAIN PAGE
DUAL MONO(1+1)SETUP
Default Setting: STEREO
Select the Dual Mono reproduction mode to support dual
mono programs.
•
STEREO: Reproduces both channels as stereo.
•
LEFT MONO: Only reproduces left mono signal to FL and
FR channels.
•
RIGHT MONO: Only reproduces right mono signal to FL and
FR channels.
•
MIXED MONO: Reproduces both channels mixed together.

Dynamic Range Setting

Dynamic Range Setting
Dynamic Range Setting Dynamic Range Setting Dynamic Range Setting
Path: Main Page
Default Setting: FULL
In many listening situations, it is objectionable to allow the
sound to become very loud, and thus the loudest sounds must
be compressed downwards in level. Likewise, the very quiet
sounds would be inaudible and must be brought upwards in
level to be heard. Dolby Digital satisfies these needs through
the dynamic range controlling.
Select the dynamic range compression to fit the individual
listening situation of the audience. The variable range is from
FULL, 7/8 to 1/8, or OFF.
•
FULL: Audio with fully compressed dynamic range.
•
7/8~1/8: Audio with partially compressed dynamic range.
•
OFF: Audio with uncompressed dynamic range.
Note:
•
The Dual Mono and Dynamic Range settings only support
Dolby Digital programs.
35
Dolby Digital Setup Dual Mono
STEREO
LEFT MONO
RIGHT MONO
MIXED MONO
Dolby Digital Setup Dynamic RNG