Table of Contents
Advertisement
EXTERNAL CONTROL THROUGH RS-232C
The RS-232C port allows you connect
the RS-232C
input jack to an external
control
device (such as a computer
or an A/V control
system) to control
the TV's functions
externally.
01_ Note: RS-232C
on this unit is intended
to be used with third
party RS-232C
control
hardware
and software.
The instructions
below are provided
to help with programming
software
or to test functionality
using telenet
software.
RS-232C
Setup
PC
m
z
x
Type of Connector;
D-Sub 9-Pin Male
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
Communication
Parameters
,l_Baud rate : 9600
bps (UART)
01_ Data length : 8 bits
,l_Parity : None
,l_Stop bit : 1 bit
,l_Communication
code : ASCII code
01_ Use a crossed (reverse) cable.
@
@
110
Hide quick links:
Advertisement
Table of Contents
