Table of Contents
Advertisement
18.
19.
Auto Configuration
(Command:
j u)
To adjust picture
position
and minimize image shaking
automatically.
Auto configuration
only works in RGB-PC
mode.
Transmission [j]
[U][] [Set ID][]
[Data] [Cr]
Data 1 : To set
Acknowledgement[u][]
[Set ID][
] [OKiNG]
[Data] [x]
Channel
Tuning
(Command:
m a)
To tune channel to following physical/major/minor
number.
Transmission [m] [a] [] [Set- ID] [ ] [DataO0] [] [Data0] ]
[] [Data02]
[] [Data03] [] [Data04]
[] [Data05]
[Cr]
Digital channels have a Physical, Major, and Minor channel
number. The Physical number is the actual digital channel
number, the Major is the number that the channel should
be mapped to, and the Minor is the sub-channel.
Since
the ATSC tuner automatically
maps the channel
to the
Major number, the Physical number is not required when
sending a command.
Data 00: Physical Channel Number
NTSC air: 02-45,
NTSC cable: 01, OE-7D
ATSC air: 01-45,
ATSC cable: 01-87
Data 01 & 02: Major Channel Number
Data 01 : High byte
Data 02: Low byte
Two bytes are available for the Major and Minor, nor-
mally only the second byte is used.
Data 03 & 04: Minor Channel Number
Not needed for NTSC.
Z
X
114
Hide quick links:
Advertisement
Table of Contents
