Safety Instructions 1) Read these instructions in their entirety. 2) Store this manual and packaging in a safe place. 3) Heed all warnings. 4) Follow instructions (do not take short cuts). 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any ventilation openings.
• Keep all power cords away from all signal cables to prevent humming from induced noise. • Choose reliable signal cable cords (Earthquake Sound also specializes in high-performance RCA cables and patches). • All speaker wires that are ran through the walls should be twisted to reduce potential hum noise pick up.
Painting Guidelines RCS in-ceiling speakers are paintable and can accept virtually any type of paint. Spray and roller paint applications typically provide the best results. When you are ready to begin painting remember to shield the driver and tweeter from the paint. Be sure to remove the inner grille cloth before painting. Replace it once the paint has completely dried.
Page 6
Easy Installation Cut the hole using the provided cut out template Wire the speaker using the non- obtrusive spring- loaded terminals Mount the speaker by utilizing the Turn- N-Lock installation mechanisms RCS In-Ceiling Manual Earthquake Sound Corp. | www.earthquakesound.com...
Matching Products For more involved projects requiring multiple pairs of Earthquake In-Ceiling Speakers, use the Cinénova IR16. This 16 channel, 8 zone amplifier is the best multi-room amplifier on the market. It can output 100 watt RMS with a bridged 8-ohm set up and 150 watt RMS with a 4-ohm configuration.
Otherwise, there will be repackaging charge in addition to labor, parts and shipping charges. (C) Earthquake agrees to repair or replace - at our option - all such defective products/parts subject to the following provisions: • Defective products/parts have not been altered or repaired by other than an Earthquake factory approved technician.
Page 11
• Subsequent damage to other products. A warranty claim will not be valid if the warranty registration card is not properly filled & returned to Earthquake with a copy of the purchase receipt. (E) Service Request: To receive product(s) service, contact Earthquake service department at (510) 732-1000 and request an RMA number (Return Material Authorization), items shipped without a valid RMA number will be refused.