Using Your Dc15 Tools; Wand Mode; Hose Mode; Stair Cleaning - Dyson DC15 Owner's Manual

4

Using your DC15 tools

IMPORTANT
• Ensure machine is in
upright position before
using tools.
• To protect your floors, the
brushbar will not rotate
when the machine is in
an upright position.
• Ensure hair and loose
clothing are kept clear of
wand cap when machine
is switched on.
• Ensure wand cap is closed,
unless using with tools.
• Powerful suction can
cause the hose to `pull
back' – please take care
when using the wand.
• To avoid personal injury
and to prevent the
machine from falling
when cleaning stairs,
always place it at the
bottom of the stairs.
Do not use your vacuum
cleaner outdoors or on
wet surfaces. Vacuum may
be used inside a garage
only when used with the
Model 08909 Dyson Car
Cleaning Kit accessories.
If used in a garage, care
should be taken to wipe
the soleplate and wheels
with a dry cloth after
vacuuming to clean off
any sand, dirt, or pebbles
that could damage
delicate floors.
A

Wand mode

A Push back wand cap. Pull wand from inside handle until it clicks.
B Press wand release button to release hose and wand handle from
machine. To push wand back inside hose, ensure hose is straight.
Press the same wand release button and push wand down into hose.
The vacuum has been designed to follow you when used in wand or

hose mode.

tip When putting the wand back on the machine, make sure wand release
button is facing forward.
B
B
A
B
Hose mode
A First extend the wand, then
press side hose release buttons
to remove wand handle from
hose, and pull hose to separate
hose from wand.
B Tools can be fitted directly to
the end of hose or wand.

Stair cleaning

Always work with the
machine at the bottom
of the stairs.