Dukane 8755J-RJ User Manual page 10

Setting up
Connecting your devices (continued)
To use network functions of the projector, connect the LAN port to the computer's
LAN port.
To use NETWORK BRIDGE function, also connect the CONTROL port and an
RS-232C port of the external device to communicate as a network terminal.
See the User's Manual - Network Guide for details of network functions.
External device
WARNING
►Be careful not to damage the cables, and do not use damaged cables.
CAUTION
connecting them to projector. Connecting a live device to the projector may
generate extremely loud noises or other abnormalities that may result in
malfunction or damage to the device and the projector.
►Use appropriate accessory or designated cables. Ask your dealer about non-
accessory cables which may be required a specific length or a ferrite core by
the regulations. For cables with a core only at one end, connect the end with
the core to the projector.
►Make sure that devices are connected to the correct ports. An incorrect
connection may result in malfunction or damage to the device and the projector.
►Be sure to consult the administrator of the network. Do not connect LAN port
to any network that might have the excessive voltage.
NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the
input ports of the projector are recessed.
(continued on next page)
10
RS-232C
BAT TERY
►Do not disassemble or modify the projector and accessories.
►Turn off all devices and unplug their power cords prior to
Computer
LAN
LAN