Setup Menu - Dukane 8970 User Manual

SETUP menu

SETUP menu
From the SETUP menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
Selecting this item performs the Automatic keystone distortion
correction. Projector automatically corrects vertical keystone
distortion due to the (forward/backward) setup angle by itself.
This function will be executed only once when selected in the menu.
When the slant of the projector is changed, execute this function again.
• The adjustable range of this function will vary among inputs. For
some input, this function may not work well.
• When the projector is in one of the following conditions, the
automatic vertical keystone correction feature may not work
AUTO KEYSTONE
correctly or at all.
- REAR / CEILING or FRONT / CEILING is selected for the
- The ZOOM adjustment is not set to the full WIDE (wide-angle
- The projector is nearly horizontal (about ±4°).
- The projector is inclined at about ±35 degrees or over.
• This function is unavailable when the TRANSITION DETECTOR
(90) is ON or the screen is adjusted by PERFECT FIT (33, 34).
Using the ◄/► buttons corrects the vertical keystone distortion.
• The adjustable range of this function will vary among inputs. For
some input, this function may not work well.
• When the zoom adjustment is set to the TELE (telephoto focus),
KEYSTONE
this function may be excessive. This function should be used when
the zoom adjustment is set to the full WIDE (wide-angle focus)
whenever possible.
• This function is unavailable when the TRANSITION DETECTOR
(90) is ON or the screen is adjusted by PERFECT FIT (33, 34).
(continued on next page)
54
INSTALLATION item in the SETUP menu, and the projector screen
is slanted or tilted downwards.
focus).
Shrink the bottom of the image ó Shrink the top of the image
Description