DryGuy Circulator DG10 Instruction Manual

Boot & shoe dryer

Table of Contents

Download this manual

Circulator

DG10

™

Boot

& Shoe Dryer

INSTRUCTION MANUAL

BEFORE RETURNING THIS PRODUCT

FOR ANY REASON PLEASE CALL

1-888-330-9452

IF YOU SHOULD HAVE A QUESTION OR EXPERIENCE

A PROBLEM WITH YOUR DryGuy

PRODUCT

™

CALL 1-888-330-9452

Before you call, please have the following information available: Product MODEL number which is located below the UPC code on the

outside of the product box and the store receipt with purchase date. In most cases, a DryGuy

representative can resolve the problem

™

over the phone and if not can direct you to an authorized service center. If you have suggestions or comments, please send them via email

to: info@dryguy.net. Your feedback is vital to DryGuy

™

SAVE THIS MANUAL FOR FUTURE REFERENCE

Table of Contents

Need help?

Do you have a question about the Circulator DG10 and is the answer not in the manual?

Page 1 Before you call, please have the following information available: Product MODEL number which is located below the UPC code on the outside of the product box and the store receipt with purchase date. In most cases, a DryGuy representative can resolve the problem ™...
Page 2: Save These Instructions
Circulator against toe of the shoe or boot, leave one inch of free space. ™ ™ • Use of attachments not recommended or sold by DryGuy may result in a risk of fire, electric shock, ™ or injury to persons.
Page 3 ™ opening at the entrance to footwear as attainable being careful not to restrict or block air flow by any means. 4. Leave one inch of free space between DryGuy Circulator and the toe end of the shoe or boot.
Page 4: Service Information
To assure product SAFETY and RELIABILITY, repairs and maintenance (other than those listed in this manual) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts. AccessORIes: No recommended accessories for use with your DryGuy Circulator are available at this time. ™...