Table of Contents
Advertisement
The inherent security properties of NAT are somewhat bypassed if you set up DMZ
host. We suggest you to add additional filter rules or a secondary firewall.
Click DMZ Host to open the following page:
If you previously have set up WAN Alias in Internet Access>>PPPoE/PPPoA or Internet
Access>>MPoA, you will find them in Aux. WAN IP list for your selection.
Enable
Private IP
Choose PC
Vigor2700Ge/e User's Guide
Check to enable the DMZ Host function.
Enter the private IP address of the DMZ host, or click Choose PC to
select one.
Click this button and then a window will automatically pop up, as
depicted below. The window consists of a list of private IP addresses
of all hosts in your LAN network. Select one private IP address in
the list to be the DMZ host.
33
Hide quick links:
Advertisement
Table of Contents
