Table of Contents
Advertisement
CONTROL - REAR PANEL
1. LAN
Connect the RJ45 standard pass through cable to the internet, or directly to a PC using
the crossover cable
2. ACT & LINK LED's (Actual & Link)
When these LED's are blinking it indicates that the network is in operation
3. VIDEO INPUT (BNC, 2 channels)
Connect to a video source, such as a camera or DVR video output.
4. ALARM I/O (optional for advanced applications)
Connect control devices, such as a DVR, Motion Sensors, external
alarm signal inputs, etc
5. POWER
Plug in the supplied power adaptor (12V ).
BOTTOM PANEL :
RESET BUTTON (at the bottom of the Video Web Server)
Push this button for more than 5 seconds to reset the setting back to the default
setting.
1
2
Bottom
:
3
3
4
5
-4-
Advertisement
Table of Contents
