Table of Contents
Advertisement
PIN 5. GND
Ground
PIN 2, 3. NORMAL HIGH, NORMAL LOW
Use PIN 2 or 3 to trigger an external device
Please see the picture below for a 1CH DVR connected to the Video Web Server.(See
Appendix #1)
Video Web Server
STEP 10: CONNECTING ALL DEVICES
DVR
STEP 11: CONNECTING TO A PC VIA THE INTERNET
1. Change PC network setting to the original setting and link PC to the internet.
2. Click
twice and enter your User name, Password and host on the Video
Web Server. (Note : If you did not change the "Account" , the User Name and
Password are both "admin"). Click OK to connect.
RS485-A
Pin 1
Pin 6
RS485-B
digimerge.dyndns.org
1 CH DVR
Pin 10
Pin 11
ADSL modem
(WAN end)
DDNS HOST
-25-
Advertisement
Table of Contents
