Manual Recording - Philips DVDR890A User Manual

G
With this DVD recorder, you can record on two types of DVD:
This disc can be written to and then the contents deleted.
This type of disc can only be recorded once.
If you want to play this DVD in a DVD player it must be finalized using the
' ' function. It is not possible to make further recordings using
this disc.
If this disc is to be played in a DVD recorder it must not be finalised.
Recordings can be added and deleted. The disc space (playback time) from the
deleted recording cannot be recovered for further recordings
Use the 'Manual recording' feature to spontaneously start recording (e.g. to record a TV show
already in progress).
In the 'Index Picture screen' select the title to be overwritten or '
A .
If you want to record between existing recordings, check the length of the old recording and the
length of the new recording. If the new recording is too long, the following recording
(title/chapter) will be overwritten.
To add a new recording at the end of the last recording on the disc, hold
down the REC/OTR n button until the message '
display.
For DVD+R discs each new recording is always added at the end of all
previous recordings as existing recordings cannot be overwritten.
If you want to start and stop a recording manually, read
.
If you want to start a recording manually but stop it automatically, read
. (e.g. not to record to the end of the disc)
Read
controlled automatically by a satellite receiver.
Read if you want to record a programme currently being shown.
' using B and
' appears on the
, if you want a recording to be

Manual recording