Table of Contents
Advertisement
SMV300 O/M.QXD
6/21/01
ON/OFF TIMER
This feature will allow you to set the unit to turn on and off automatically at preset times.
1
Press the POWER button; the
button color will change from red
to green which means the unit is
on.
4
1
Set the correct hour (and AM/PM)
using
the
TUNING/SKIP/
SEARCH (
) or (
When finished setting the hour,
press
the
PROG/MEMORY
button
on the remote again and
the minutes will blink.
7
1
Set the hour and minute the same
way as you did for the Timer On.
NOTES:
•
While setting, carry out each step within 5 seconds, otherwise the operation will time out and you will
have to start again.
•
To cancel the timer, press the TIMER button until "TIMER" disappears from the display.
7:46 AM
Page 15
2
Select a radio station or a CD that
you would like to be playing when
the unit switches on.
If selecting CD, you can also
program tracks into memory to be
played.
5
1
2
Set the correct minute using the
TUNING/SKIP/SEARCH (
) button .
(
) button .
When finished setting the hour,
press
the
button
and the clock will be set.
8
1
2
To activate the timer to turn on
and off at the preset times, press
the TIMER button on the main
unit; "TIMER" will appear in the
display.
3
Press the REMAIN/MODE button
appears in the display, then
immediately press the PROG/
MEMORY button
will blink.
6
1
1
2
Press the REMAIN/MODE button
) or
appears in the display, then
immediately press the PROG/
PROG/MEMORY
MEMORY button
will blink.
9
Press the POWER button to turn
the unit off and into the Standby
mode; the POWER button will
light red. When the actual time
reaches the Timer On time, the
unit will turn on.
15
2
1
repeatedly until, "TIMER ON"
and the hours
2
1
again until, "TIMER OFF"
and the hours
Advertisement
Table of Contents
